WHL-F50 CNC HORIZONTAL WHEEL TURNING LATHE
|
FATEK WHL-F50 CNC HORIZONTAL WHEEL TURNING LATHE
Cost Effective Wheel Turning Machine Twin Turrets for Faster Aluminum Wheel Turning.
Features :
Ergonomics Design:The existing four-axis aluminum wheel turning machine on the market sets the lower turret on the right-button side of the machine causing the inconvenience for the operator to close to the spindle and also hardly to load and unload the material. WHL-F50 advances above weakness. The left and right auto door can move simultaneously, facilitating whole operations.
Both sides auto door simultaneous movement can improve the operating space and raise the convenience for the operator to load and unload the materials.
The height between spindle center and foot pedal is 900 mm. Operator can easily load and unload the wheel to reduce the extra burden.
Max. Turning Diameter:ø600 mm
Max. Turning Length: 725 mm
X-Axis Rapid Traverse Rate:16 m/min
X-Axis Max. Travel (upper): 295 mm
X-Axis Max. Travel (lower): 180 mm
Z-Axis Rapid Traverse Rate:20 m/min
Z-Axis Max. Travel (upper): 700 mm
Z-Axis Max. Travel (lower): 550 mm
Specification :
CAPACITY
--Max. turning diameter: ø600 mm
--Max. swing over bed ø725 mm
SPINDLE
--Spindle dia. at front bearing ø130 mm
--Spindle speed 2500 rpm
--Spindle motor (continuously/30min) 37/45 kW
--Spindle nose A2-8
TURRET
--Number of tools 10(Upper)/6(Lower)
--Tool size OD/ID 口25/50 mm
X-axis
--Travel 295(Upper)/180(Lower)
--Rapid traverse rate 16 m/min
--AC servo motor 4.0 kW
--Ballscrew ø36 X P8
Z-axis
--Travel 700(Upper)/550(Lower)
--Rapid traverse rate 20 m/min
--AC servo motor 4.0 kW
--Ballscrew ø50 X P10
COOLANT UNIT
--Pump For this ooling 1.27 kW
--Pump For chips cleaning 1.1 kW
--Container 1000 Liters
HYDRAULIC UNIT
--Pump 2.2/3 kW/HP
--Container 44 Liters
LUBRICATION UNIT
--Pump 25 W
--Container 4 Liters
MACHINE SIZE
--Width 5200 mm
--Depth 2300 mm
--Height 2200 mm
WEIGHT(Approx.) 12000 kgs
Friction Material :
«Design and specifications are subject to change without prior notice»
|
