Bihler RM 40K Punching and Forming Automatic
|
Central mandrel
|
Slide units
|
Press
|
Feeding unit
|
Base plate
|
linear 02
|
linear 01
|
radial
|
Control
|
Bihler RM 40K Punching and Forming Automatic
With the latest Punching and Forming Automatic RM 40K Bihler offers you nothing but pure added-value. You profit greatly from a comprehensive mix of technological and economical advantages. More capacity, more productivity and more flexibility as well as the secure feeling to have a strong partner at one’s side at any time.
radial
In case you already dispose of an RM 35, RM 40 or RM 40E this consequent, compact further development opens new successful perspectives. The RM 40K offers you compatibility with the tools of these machines, more capacity due to optimized working procedures as well as the new user-friendly Bihler VariControl VC1-E.
linear
Due to the open design of the machine you can easily integrate all Bihler key technologies as e.g. welding, tapping, screw insertion, assembly, etc. into your processing concept.
linear
The larger opening in the work plate for flexible central mandrel movements provides for further integration possibilities from the machine’s rear side.
Base plate
Conversion times of tools and cams are decisively reduced thanks to the innovative Bihler quick-change systems. The powerful two-point eccentric press unit with large mounting area for longer die sets rounds off the convincing mix of advantages. RM 40K – an investment that pays off!
Standart accessories
Feeding unit
A mechanical feed unit with feed time reduction, feed length up to 240 mm and max. strip width of 60 mm provides for a precise feeding operation. The gripper and the non-return gripper are both hydraulically actuated and electronically controlled. The intermediate lifting of the non-return gripper is freely programmable.
Press
The two-point eccentric press unit (90kN; 30° before B.D.C.) stands out for its larger mounting area for die sets
up to 320 mm length and 170 mm width. Hight over B.D.C. is 116 mm, the stroke is 12 mm and the stroke adjustment
0 up to –3,5 mm.
Slide units
In order to guarantee a quick tool change all left-hand and right-hand standard slide units (max. stroke 50 mm, nominal force 60 kN) as well as all narrow slide units (max. stroke 40 mm; max nominal force 40 kN) are equipped with an innovative tool quick-clamping system.
Central mandrel
The arrangement of the holes in the work plate is identical with the one of the RM 40E and compatible with the one of the RM 35. The central aperture with 125 mm diameter, 200 mm width and 84 mm hight is larger designed and provides for the integration of up to two positively controlled or spring loaded versions.
Control
The fully-integrated VC1-E is especially designed for the Bihler E and K machines. It stands out for its user-friendlyness via 15“ touch screen with additional operator panel and intuitive operator programming guidance, up-to-date components with air condition free industrial PC and real time operating system VX-Works.
Specifications:
– Stroke rate:
Stepless from approx. 5 up to 350 r.p.m.
– Material rear edge:
80 mm before machine base plate
– Machine weight:
2.000 kg depending on equipment (without tooling)
– Machine dimensions:
Width 2.020 mm x depth 1.330 mm x height 2.030 mm
|
