High precision lathe Schaublin 225 Plus.
radius turning, thread correction, metric/Inch
Capacities
Maximum turning diameter 200 mm
Maximum swing over carriage 115 mm
Height of centres over carriage 60 mm
Turning length 400 mm
Headstock
Spindle speed 50 – 5000 min-1 min
With quick clamping direct AC motor drive 4000 min-1 min
Power 4 kW
Max. torque 26 Nm
Spindle nose Camlock D1-3”
Max. throughbore with collet 24 mm
Max. throughbore with jaw chuck 27 mm
Spindle for Schaublin collets B32
Apron and carriage
Transverse stroke: X-axis 140 mm
AC motor drive, nominal torque 2.9 Nm
Ball screw, Ø x pitch 20 x 5 mm
Longitudinal stroke: Z-axis 400 mm
AC motor drive, nominal torque 2.9 Nm
Ball screw, Ø x pitch 20 x 5 mm
Resolution, on radius 0.0005 mm
Tailstock
Spindle taper MORSE 2
Spindle longitudinal stroke 100 mm
Starwheel-operated tailstock
in option MORSE 3
Milling device
in option
Feeds
Working feeds, X-/Z-axis, stepless 0-5000 mm/min
Rapid feed, X-/Z-axis 7.5 m/min
Feed power, X-/Z-axis 500 daN
Tooling system linear
Radial 2
Frontal 2-5
Collets holder ESX 20
Bar holder ø 20 mm
MULTIFIX system 16 x 16
Coolant supply in option
Capacity of coolant tank 55 l
Pump power 10 l/min
Pressure 1.7 bars
Weight / Dimensions
Net weight 1120 kg
Dimensions: length - width - height 1600 x 1030 x 1650 mm
Loadfloor 700 kg/m2
